ECEEN Solar Panel Connectors to DC 5.5x2.1mm Plug Extension
Cable 16AWG with DC 3.5x1.35, 5.5x2.5 & 8mm Adapters For Portable Backup
Power Station Rechargeable Battery Pack Solar Generator 5ft(1.5m)
1.
Solar Panel Plug-DC -- It provides a convenient solution for most
of solar panel with Solar Panel Plug (MC4) and also suitable for the power
station with DC8mm,DC3.5x1.35mm and DC5.5*2.5(5.5*2.1)mm input
2.
Material & Dimension -- Gauge: Heavy-duty 16AWG copper wire,
Cable Length (including Solar Panel Plug and DC connectors):5ft(1.5m). The solar
panel PV wire is made with high quality copper material. The cable is
weatherproof and designed to withstand heat and cold.
3.
Come with 4 Connectors -- Solar Panel Plug (male / female) to DC
male 5.5mm x 2.1mm plug solar extension wire, The DC5.5 x 2.1mm plug can
convert to DC5.5 x 2.5mm connector, DC8mm plug, and DC3.5 x 1.35mm adaptor.
4.
Multi-Application -- Be widely used for 10W~100W framed, flexible
and foldable solar panel and solar generator, The solar panels output power
should NOT EXCEED 100W.
5.
NOTE -- it only can be use to charge the load. Make sure the
solar panels connectors will not be submerged in water when the solar cable
wire connectors are connecting with the solar panel outlet MC4 connecters.
Before the final connection of the solar PV connector, please check the
polarity of the connectors. Don't reverse the polarity!
Features:
1.
This extension cable Perfectly Compatible with Portable
Power Station and Freely Assemble to solar panel.
2.
Easy to install Connector to DC 5.5mm x 2.1mm, DC3.5x1.35mm,
DC5.5mmx2.5mm, DC8mm adapter cable, Charge Portable Power Station Better adapt
to your outdoor travel, RV, camper, trailer, boat and so on.
3.
The main line of the cable is made of heavy-duty 16AWG
wire, 1.5M (about 5FT) long, and the two branch wires are made of 16AWG wire,
0.5M (about 1.6FT) long, and the long connection distance allows you to connect
to solar panels for charging The best position can be adjusted at any time,
suitable for 10W~100W frame, flexible and foldable solar panels. The output
power of solar panels should not exceed 100W.
Come with 4 different DC connectors :
5.5*2.1mm DC
Adapter for Rockpals 250W/PRYMAX 300W portable generator;
5.5 * 2.5mm DC
Adapter for Suaoki 400wh portable generator.
3.5*1.35mm DC
Adapter for Suaoki S270/ENKEEO S155/Paxcess 100W portable generator;
The 8mm DC
Adapter for Jackery Explorer 240/160/500 and Goal Zero Yeti 150/400 Power
Station.
How to use:
1. Select one solar panel for your generator, make sure your panel’s voltage
and watt is not too big nor too small
Place solar
panels in the sun
2. Check if the PV panel has solar connectors, Choice the right DC adapter to
pair your power station.
3. Connect the
solar connector with panel and the adapter (cable)
4. Connect the
DC plug-in to the solar generator
5. Put the solar
panel under the sunlight and turn on the generator in shade.
Specification:
Connector 1: Solar male and female connector (input end)
Connector 2: DC55*2.1mm connector (output end)
Wire specification: 16AWG
Waterproof rating: IP65
Cable length: 5ft(1.5m)
Weight: 0.27lbs(120g)
Package includes:
Solar Panel Plug(MC4) to DC(5.5x2.1mm) cable *1
DC 3.5x1.35mm
Adapter*1
DC 5.5x2.5mm
Adapter*1
DC 8mm Adapter*1
Note:
Before finally connecting the MC4 connector, check the polarity of the
connector. Don’t reverse polarization
In some cases, if you find that your solar panel is not charging the power
station, just try to switch the positive and negative solar connectors on the
side of the solar panel, it will change the polarity and start charging.
Package: 20*12*2cm
